Chemical & Materials Market Research Reports

Coated Glass Market Report by Product Type (LOW-E Glass, Heat-Reflective ) by Application / End User (Automotive Glass, Construction Industry, Solar Battery Module, Electronics ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends and Forecast 2018–2026.

Status: Published 16-Mar-2018
       135 Pages
Global Coated Glass Market is valued at USD 13.6 billion in 2017 and is expected to reach USD 23.2 billion by the end of 2025, growing at a CAGR of 6.9% between 2017 and 2025. Surface coatings can be applied to glass to modify its appearance and give it many of the advanced characteristics and functions such as low maintenance, special reflection/transmission/absorption properties, scratch resistance, corrosion resistance, etc. Glass coatings consist of particles of silicon dioxide within the hard resin that acts as barrier to contamination and increase shine.

Activated Polyethylene Glycol (PEG) Market by Product Type (Linear PEGs, Branched PEGs, Multi-arm PEGs ) by Application /End User (Pharmaceutical Intermediates, Medical Devices ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends, and Forecast 2018–2026.

Status: Upcoming
      135 Pages
Polyethylene glycol (PEG) is basically a polyether compound with structural formula H−(O−CH2−CH2)n−OH. It is prepared by the reaction of ethylene oxide and water under pressure in the presence of a catalyst. Polyethylene glycol is available in three different forms depending on molecular weight. These are PEG which is miscible in all other grades of PEG in various proportions. The PEG which are available in liquid form are soluble in acetone, alcohols, benzene, glycerin, and glycols. Solid PEGs are soluble in acetone, dichloromethane, ethanol (95%), and methanol. They are also soluble in aliphatic hydrocarbons and ether. But they are insoluble in fats, fixed oils, and mineral oil.

316 Stainless Steel Market Report by Product Type (316, 316L, 316H ) by Application /End User (Food Processing Equipment, Laboratory Equipment, Architectural Panelling, Chemical Containers, Industrial Equipment ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends, and Forecast 2018–2026.

Status: Upcoming
      125 Pages
316 stainless steel is austenitic steel. Chemical composition of 316 type steel contains 16-18% Chromium, 10-14% Nickel and 2-3 % Molybdenum. This added Molybdenum improves corrosion resistance, pitting in Chloride ion solutions resistance, and strength at higher temperatures. It particularly improves corrosion resistance against sulfuric, hydrochloric, acetic, formic and tartaric acids and as well as acid sulfates and alkaline chlorides. These are useful in pharmaceuticals to prevent extra metallic contamination. 316 stainless steel has excellent physical properties. It is very tough and durable.

304 Stainless Steel Market Report by Product Type (304, 304L ) by Application /End User (Aerospace Structures, Food and Beverage Industry, Pressure Containing Application, Architectural Structures, Sanitary or Cryogenic Application, Chemical Industry Processing Equipment ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends, and Forecast 2018–2026.

Status: Upcoming
      130 Pages
The 304 stainless steel is or A2 stainless steel or 18/10 or 18/8 stainless steel is most commonly used type of steel. The numbers 18/10 and 18/8 represents quantity of Chromium and Nickel in steel. It’s chemical composition contains 18% of Chromium, 8% of Nickel and 0.08% of Carbon. 304 is an austenitic steel. It is having excellent toughness, softness, ductility, spinning, forming and drawing properties. It possesses excellent corrosion resistance and heat resistance properties. It is non- magnetic in annealed condition but becomes magnetic in cold workings.

301 Stainless Steel Market Report by Product Type (301 Annealed,301 1/4 Hard, 301 1/2 Hard, 301 Full Hard ) by Application /End User (Equipment Parts, Computer Parts ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends, and Forecast 2018–2026.

Status: Upcoming
      127 Pages
Among all sheet metals steel is widely used in sheet metal fabrication in industries. 301 Stainless steel is a austenitic steel and its chemical composition contains 17% Chromium and 7% Nickel. 301 Stainless steel is modified 304 steel. In this Chromium and Nickel amount is reduced than 304 to obtain variety of cold work hardening range. In annealed condition it acts as non-magnetic but it becomes magnetic in cold work conditions. 301 possesses better corrosion resistance than 304. 301 steel does not get hard when exposed to heat. It can withstand temperature upto 1600⁰ F (810⁰ C).

Titanium Alloy Market Report by Product Type (Ti-6Al-4V, Ti-6Al-2Sn-4Zr-6Mo ) by Application /End User (Aerospace Applications, Chemical Industrial Production Plants, Biomedical Applications, Commercial Applications ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends, and Forecast 2018–2026.

Status: Upcoming
      124 Pages
Titanium is present in large amount in earth’s crust. Titanium alloys are prepared by chemical reaction of pure titanium with other elements. Titanium alloys have low density and light weight. They very tough at extreme temperatures. They are highly corrosion resistive and possesses good strength to weight ratio. Therefore demand for titanium alloys is showing steady growth in market. Pure Titanium and its alloys are used in various type of applications.

High Temperature Epoxy Resins Market by Temperature Range ( <300 °F, 300-600 °F, >600 °F) by Application / End User (Ultra Temp Adhesive, Adhesive & Tooling Compound, Potting and Encapsulating) by Industry Analysis, Volume, Share, Growth, Challenges, Trends and Forecast 2018–2026

Status: Upcoming
      130 Pages
In a chemical process when polyepoxides reacts with themselves or with polyfunctional co-reactants, they create a thermosetting polymer, which has excellent mechanical properties, temperature resistance, corrosion resistance, water resistance and chemical resistance. Also epoxy resins have good stiffness and toughness properties. They are having good adhesion with metals, plastics, wood, glass and ceramics.

Aluminium Powder Market Report by Product Type (Spherical Aluminum Powder, Spherical Aluminum Powder ) By Application /End User(Photovoltaic Electronic Paste Industry, Paint and Pigment Industry, Refractory Materials Industry ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends and Forecast 2017–2025.

Status: Published 13-Mar-2018
       233 Pages
Aluminium Powder Market is valued at USD 3 billion in 2017 and is expected to reach USD 3.92 billion by the end of 2025, growing at a CAGR of 3.4% % between 2017 and 2025. Aluminium is available abundantly in nature. It has corrosion resistant and non- toxic nature. Aluminium powder is nothing but grinded aluminium metal. It is odourless, lightweight and flammable. Its colour is slightly grey. It’s oxidation reaction is exothermic. It can also react with various organic and inorganic chemicals.

Aluminium Alloy Market by Heat Sensitivity Type (Heat Treatable Alloys, Non Heat-Treatable Alloys) Design Type(2000 Series, 6000 Series, 7000 Series, 3000 Series, 4000 Series, 5000 Series) by Application /End User (Electrical Application, Food Packaging, Truck and Marine Frames, Aircraft Industry, Structural and Automotive, Architectural) by Industry Analysis, Volume, Share, Growth, Challenges, Trends and Forecast 2018–2026.

Status: Upcoming
      125 Pages
Cost of aluminium is lower than copper therefore in electric sector it is highly preferred. Due to lightweight components, better fuel efficiency and reduced emissions trends aluminium alloys are preferred in automotive sector on large scale.Aluminium alloys have great barrier properties against UV light, moisture and odour therefore they are used in food packaging industries also.

Defoamers Sales Market by Product Type (Water-based Defoamers, Oil-based Defoamers, Silicone-based Defoamers ) by Application /End User (Chemical Manufacturing and Formulating, Food Production and Processing, Pulp and Paper Manufacturing, Textiles, Paints and Coatings ) by Industry Analysis, Volume, Share, Growth, Challenges, Trends and Forecast 2017–2025.

Status: Upcoming
      124 Pages
Defoamers are the anti- foaming chemical additives that containing blend of activated silicone oil and surfactants. These agents are primarily used to reduce the foam formation in industrial process liquids. Formation of the foam can cause defects on surface coatings and prevent the efficient filling of containers. Features of deformers are anti-foaming agents, contain silicone oil and surfactants, reduce the formation of foam, control the generation of foam on surface of liquid, used in industrial processing liquids, low viscosity & surface active properties, affinity to the air-liquid surface.